Search found 4 matches

by jbszee
Tue Feb 01, 2011 2:20 pm
Forum: Sno-Scoot/Sno-Sport Technical Forum
Topic: Dumb Question - Where is crankcase oil drain on Scoot???
Replies: 2
Views: 5823

Dumb Question - Where is crankcase oil drain on Scoot???

Everything is working great now on my Scoot. Finally got the choke fixed, cleaned the carb, and runs like a champ. However, in going through the annual maintenance, manual suggests draining and replacing crank case oil. Even with the microfiche drawings, I can't locate the drain and fill plugs. So w...
by jbszee
Thu Jan 06, 2011 6:41 pm
Forum: Sport & Scoots Parts Forsale & Wanted
Topic: Need carb parts and jets - Anyone stock these parts???
Replies: 0
Views: 1649

Need carb parts and jets - Anyone stock these parts???

I've found the bits and pieces I need from several dealers online. But they all tell me they have to order parts from Yamaha, then ship to me. So that puts everything about two weeks out. Does anyone have a source who actually stocks parts????? Here's what I need: SPRING,PLUNGER Part# 127-14135-00-0...
by jbszee
Tue Jan 04, 2011 3:32 pm
Forum: Sno-Scoot/Sno-Sport Technical Forum
Topic: Removing Choke Cable (labelled Starter) from Carb
Replies: 6
Views: 7500

Re: Removing Choke Cable (labelled Starter) from Carb

The choke Plunger is really stuck in the carb body. Are you sure it is supposed to come out the top? I can soak some oil or WD40 in there to see if it will come loose. But I don't want to try to pull it out the top if it is supposed to be removed from the bottom of the carb body. It looks like some ...
by jbszee
Sat Jan 01, 2011 2:41 pm
Forum: Sno-Scoot/Sno-Sport Technical Forum
Topic: Removing Choke Cable (labelled Starter) from Carb
Replies: 6
Views: 7500

Removing Choke Cable (labelled Starter) from Carb

How do you remove the Choke (Starter) Cable from the Carburetor???? I took the carb off, and could not see any way to get it out. The Toggle switch on the panel is broken off, and I have a new switch to replace it. But I can't figure out how to get the plunger out of the carb body. I unscrewed the c...