Search found 208 matches

by Mercury
Fri Feb 02, 2018 9:17 am
Forum: Mercury Parts Wanted
Topic: Drive cogs for 1971 Mercury Lightning 398 cc 30 horsepower
Replies: 1
Views: 11893

Re: Drive cogs for 1971 Mercury Lightning 398 cc 30 horsepower

I have an NOS front drive cog kit for the Lightning/Rocket. Price is $160 plus shipping.
by Mercury
Fri Feb 02, 2018 9:13 am
Forum: Mercury Parts Wanted
Topic: Wanted drive belt cogs and gas tank for 1971 Mercury Lightning
Replies: 1
Views: 4356

Re: Wanted drive belt cogs and gas tank for 1971 Mercury Lightning

I have an NOS front drive cog kit for the Lightning/Rocket. Price is $160 plus shipping.
by Mercury
Mon Feb 15, 2016 12:43 pm
Forum: Mercury Parts Wanted
Topic: 73 Mark 1 Fuel Pump
Replies: 1
Views: 5461

Re: 73 Mark 1 Fuel Pump

New OEM rebuild gasket kits available.

Email if wanted.
by Mercury
Mon Feb 10, 2014 9:21 am
Forum: Sno-Twister/Trail Twister Technical Help
Topic: twister tach
Replies: 2
Views: 6535

Re: twister tach

bass4465 wrote:Hi is the 76 sno twister tach the same as a75 sno twister tach I think they are both 6 pulse tachs
They are not the same Tach.

The easiest way to identify is the air cooled Twister Tach goes to 10,000 rpm and the Liquid Cooled Tack goes to 12,000 rpm on the dial.
by Mercury
Fri Nov 08, 2013 10:57 am
Forum: Mercury Parts Wanted
Topic: Rear grab bar/bumper for 71 Lightning
Replies: 3
Views: 5714

Re: Rear grab bar/bumper for 71 Lightning

I have lots of used ones. From fair to very good condition $15 to $35.
by Mercury
Thu Apr 11, 2013 7:33 am
Forum: Sno-Twister/Trail Twister Technical Help
Topic: 440 motors
Replies: 1
Views: 6789

Re: 440 motors

Hi I have a 76 tt which im thinking about switching motors in.. I have a 440 free air with sunburst heads. Its the ss series motor which I heard isn't as good.. im wondering if I could use the lower end on my 440 fan and bolt the jugs and heads from the free air on it..does anyone know if the lower...
by Mercury
Wed Mar 27, 2013 2:03 pm
Forum: Mercury Sled Information
Topic: Carb kits for 75 644 MKII
Replies: 1
Views: 5207

Re: Carb kits for 75 644 MKII

just picked up a 1975 644 MKII. This thing is almost perfect, it has 21 miles and was never registered. It has sat since new so I have to rebuild the carbs. Does any one know where to find rebuild kits? When I ask at dealers, they are lost. It has twin walbros. Thanks. Walbro rebuild kits have not ...
by Mercury
Thu Feb 07, 2013 8:34 pm
Forum: Sno-Twister/Trail Twister Technical Help
Topic: twister clutch
Replies: 1
Views: 6053

Re: twister clutch

I have all the NOS Genuine Mercury pieces for your stock clutch that you requested.

I will PM pricing.

Bill
by Mercury
Wed Dec 12, 2012 8:36 pm
Forum: Mercury Sled Information
Topic: model 200 driven clutch
Replies: 4
Views: 6499

Re: model 200 driven clutch

old school wrote:thanks bill, on the chaincase there is a straight lever , is that to tighten the belt?
That is correct.
by Mercury
Tue Dec 11, 2012 10:17 pm
Forum: Mercury Sled Information
Topic: model 200 driven clutch
Replies: 4
Views: 6499

Re: model 200 driven clutch

hi i read somewhere that on the chain case there is a lever that you can move forward or backward to give you reverse , can anyone help me? thanks That is not correct. Reverse which was Direct Reverse was only available on the 220 & 250. No levers on the chaincase were involved. The motor ran b...
by Mercury
Thu Dec 06, 2012 10:06 am
Forum: Mercury Sled Information
Topic: 1975 440 sr
Replies: 3
Views: 6505

Re: 1975 440 sr

You want to get all the gas out of the sump. There are 2 10mm bolts, that act as drains, at the lowest point of the block. These should be removed. The engine should be pulled over several times with the key off to push the gas/water out of the block and then let sit with the bolts out overnight. Re...
by Mercury
Wed Dec 05, 2012 7:53 pm
Forum: Mercury Sled Information
Topic: 1975 440 sr
Replies: 3
Views: 6505

Re: 1975 440 sr

Pull block drain bolts make sure crank area is not full of fuel.

Do you have spark under compression of just when the plugs are sitting on the cylinders?

With Gas off see if it will pop with some starting fluid.
by Mercury
Tue Dec 04, 2012 4:30 pm
Forum: Mercury Sled Information
Topic: 644 Hurricane Wiring Diagram
Replies: 1
Views: 5654

Re: 644 Hurricane Wiring Diagram

Sent
by Mercury
Thu Nov 15, 2012 7:08 pm
Forum: Mercury Sled Information
Topic: 87459 Track identification
Replies: 1
Views: 5359

Re: 87459 Track identification

This track fits only the Mercury SR. It is a bolt up application to replace the original flat bar track. It can only be used if it is installed with the center bracketing kit. Bill I am trying to determine which models this track will fit. I am new to this group and have very limited knowlege on the...