Techical Suggestion


Post Reply
gustavus1
Posts: 1
Joined: Thu Jan 15, 2004 2:28 pm

Post by gustavus1 »

For those that rebuild their own engines, a trick I use for getting pistons freed up in cylinders having an integril head. I take an old spark plug, break the pocelian out an braze into the hole a grease nipple. Screw this into the spark plug hole, use a grease gun to fill and presurize the cylinder. Keep pumping until the piston moves, of course this only will work for you if the piston is far enough TDC to close the intake and exaust ports.
marshall361
Posts: 1
Joined: Mon Oct 18, 2004 3:15 pm

Post by marshall361 »

Just replying to find out how you got your username."gustavus1"
I'm from Gustavus Ohio.Thanks.
Post Reply