76 440 Sno Twister clutching help


Post Reply
muskiecast
Posts: 2
Joined: Sun Dec 20, 2009 10:40 pm

76 440 Sno Twister clutching help

Post by muskiecast »

Setting up a 1976 440 Sno Twister (stock).
Was wondering if anyone had a good baseline to start with. I am using a Comet 102 for the primary and the stock Artic for the secondary.
Sled will be used to go as fast as possible in 500 feet.
Any help with the
Spring
Ramps
Secondary tension
Etc.
Help would be greatly appreciated.
Thanks
Mike
dsmith25
Posts: 8
Joined: Thu Feb 14, 2008 7:59 pm

Re: 76 440 Sno Twister clutching help

Post by dsmith25 »

I have the same setup and I'm going through this right now trying to catch my buddy's 76 440 SRX. I got a set of the adjustable clutch weights from HP performance and the secondary is wound pretty tight. I should know this weekend how it works, I'll let you know the settings. Dave
muskiecast
Posts: 2
Joined: Sun Dec 20, 2009 10:40 pm

Re: 76 440 Sno Twister clutching help

Post by muskiecast »

Thanks Dave, I look forward to hearing from you.
Mike
dsmith25
Posts: 8
Joined: Thu Feb 14, 2008 7:59 pm

Re: 76 440 Sno Twister clutching help

Post by dsmith25 »

lost compresson on one cyl. and then lost all spark. Will be down till next winter, sorry! Dave
Post Reply