76 st with polaris clutches
-
- Posts: 6
- Joined: Wed Feb 09, 2005 6:17 pm
start with any P85 secondary, used on most INDY 500's. Keep it as it is initially & see how it works. You may have to tighten a bit, but try it first. I am running Polaris clutching on my 440 T/T & works well. It's a bit tricky for alignment & you need to weld a nut on the jackshaft end, then spacer to hold secondary in place. Good luck.
-
- Posts: 6
- Joined: Wed Feb 09, 2005 6:17 pm
Hi Brent...just talked to Dave tonight. We happend to discuss Polaris secondary's!! Call me sometime & we'll talk more...Scott
<blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by Millertime6624</i>
<br />Hey thanks scott i should of known that you would know just to let ya know im the guy that runs with ruder and i run a 245 that cdi you sent me works great thanks,Brent
<hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">
<blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by Millertime6624</i>
<br />Hey thanks scott i should of known that you would know just to let ya know im the guy that runs with ruder and i run a 245 that cdi you sent me works great thanks,Brent
<hr height="1" noshade id="quote"></font id="quote"></blockquote id="quote">