flywheel loosening problem
-
- Posts: 1
- Joined: Mon Jun 20, 2005 9:28 pm
N5XL is right.
If after a couple of hits (don't beat the puller senseless) it does not pop off. Tighten up the puller and leave it. Put some PB Blaster to the bolt/keyway and let it sit. After 24 hours come back out and give it a whack. If no-joy continue the tension setup. You may come out one day and find that it "popped" off while you were gone.
Bill
If after a couple of hits (don't beat the puller senseless) it does not pop off. Tighten up the puller and leave it. Put some PB Blaster to the bolt/keyway and let it sit. After 24 hours come back out and give it a whack. If no-joy continue the tension setup. You may come out one day and find that it "popped" off while you were gone.
Bill