75 Trail Twister Carb Setup

75Merc · Post by **75Merc** » Wed Feb 19, 2003 3:59 pm

Does anyone know the original Jetting config for the Mikuni VM 36-34 carbs? These were actually off the 76 T/T but were better tuned then the VM 36-25 (off the 75's) were from what I understand.

The main jets were 270s, pilot jets 35s, and needles were 6FJ6 but I am not sure what the needle jet (Q-5?) or the air jet are supposed to be.

Thanks.

Doug

SHewelt · Post by **SHewelt** » Sat Feb 22, 2003 10:36 pm

For the 36mm on the Trail-twister: 270 mains, 159 Q-5 is needle-jet, 6FJ6 is Jet-Needle & 3.5 slide, also #35 pilot jet. Don't know the air-jet size, but 1-1/4 turn on the air-screw. Hope this helps....Scott