250er parts or parts sled

shift_79 · Post by **shift_79** » Fri Mar 10, 2006 12:46 pm

I am looking for a control box, and trigger for a 1970 250er, possibly a whole engine running or not. I may even be interested in a whole sled. e-mail me with anything you have. I am in the grand rapids michigan area, but will drive to get parts.

thanks
steve

shift_79 · Post by **shift_79** » Sat Mar 11, 2006 3:25 pm

I think I found a problem, the fan trigger(magentic pick-up wiring is corroded badly, and I cannot repair it. I need a pick-up for it. If anyone has a parts sled, or motor with one on it please let me know, or if anyone knows where i can get a new one please reply. Any help would be greatly appreciated.

shift_79 · Post by **shift_79** » Tue Mar 14, 2006 9:48 am

Engine broke a reed off, and cracked the crank case. Anyone know where a case could be located? Even a seized bottom end of an engine would be a great help for parts. I will pay a reasonable amount for parts to make it worth your while. I am also wondering where center crankshaft bearings can be located, or part #'s so I can try and find them. Thanks, Steve

Post by **Mercury** » Tue Mar 14, 2006 10:42 am

<blockquote id="quote">quote:<hr height="1" noshade id="quote">Originally posted by shift_79
 Engine broke a reed off, and cracked the crank case. Anyone know where a case could be located? Even a seized bottom end of an engine would be a great help for parts. I will pay a reasonable amount for parts to make it worth your while. I am also wondering where center crankshaft bearings can be located, or part #'s so I can try and find them. Thanks, Steve
<hr height="1" noshade id="quote"></blockquote id="quote">

I have junk motors...where are you located?

Bill

shift_79 · Post by **shift_79** » Tue Mar 14, 2006 1:42 pm

I am located in Allendale MI 49401, how much, and how much to ship?

shift_79 · Post by **shift_79** » Tue Mar 14, 2006 1:51 pm

I also need 2 new pistons, rings, base gaskets, and exhaust gaskets, maybe we can work on a package?

shift_79 · Post by **shift_79** » Fri Mar 17, 2006 1:08 am

Please let me know on the prices, and what you have for parts.
I am anxious to get this thing running. E-mail me when you figure out what you need.
Thanks,
Steve