spark

giants1 · Post by **giants1** » Fri Feb 27, 2004 10:30 pm

just got a 1976 mercury t/t k440/2as, began to get ignition breakdown on one cylinder, then progressed to total loss of spark,have replaced both external coils, rewired per manual, replacrd prestolite ignition trigger, replaced stator,after learning a buch about this stuff,found out the flywheel was never tourqued,once i did that i get nothing from stator, have checked for milli -volts readings from stator but get nothing,anybody been there?

440 MERC T T · Post by **440 MERC T T** » Sat Feb 28, 2004 7:05 pm

Did you check your stator with a ohm meter? Jeff

giants1 · Post by **giants1** » Mon Mar 01, 2004 11:39 am

<blockquote id="quote">quote:<hr height="1" noshade id="quote">Originally posted by giants1
 <blockquote id="quote">quote:<hr height="1" noshade id="quote">Originally posted by 440 MERC T T
 Did you check your stator with a ohm meter? Jeff
<hr height="1" noshade id="quote"></blockquote id="quote">
<hr height="1" noshade id="quote"></blockquote id="quote">is there a specific procedure?TJ

440 MERC T T · Post by **440 MERC T T** » Mon Mar 01, 2004 9:13 pm

http://www.hewtechelectronics.com/image ... WIRING.pdf has the procedure. JM

ddvorak · Post by **ddvorak** » Sun Dec 10, 2006 4:27 am

exact same machine with the exact same problem.

I've replaced trigger, stator, CDI, coils, coil wires....still nothing.

I still need help.....